Installation und Verwendung

5 Schritte zur Inbetriebnahme des DCL-Stellantriebs: 1. Stellantrieb am Ventil montieren 2. Mechanischen Begrenzer prüfen 3. Verdrahtung einstellen 4. Endposition (Öffnen/Schließen) einstellen 5. Inbetriebnahme Anleitungen anzeigen Mehr anzeigen > Anwendungshinweise Mehr anzeigen > Benutzerhandbuch Mehr anzeigen > Zurück: FAQ Weiter: 5 Schritte zur Inbetriebnahme des DCL-Stellantriebs

Welche Ventiltypen können DCL-Elektroantriebe ansteuern?

The DCL electric actuator is mainly used to drive butterfly valves with a diameter of less than 600mm, ball valves with a diameter of less than 350mm, and ventilation dampers and air flap valves with a diameter of less than 1200mm. Beyond these applications, some interesting use cases are also worth noting. For example: Rotating […]

Wie funktioniert ein elektrischer Stellantrieb?

Once connected to a power supply (AC380V, AC220V, AC24V, or DC24V), DCL electric actuators can be controlled by a Distributed Control System (DCS) using various control signals, including analog signals, digital signals, bus communication, and IoT networks. The actuator drives the electric valve to fully open, fully close, or adjust to a specified position, enabling […]

Warum einen elektrischen Stellantrieb wählen?

An electric actuator utilizes a motor-driven reduction mechanism to achieve both rotary and linear motion of a valve. Since it is powered by a motor, the electric actuator features a simple and reliable structure without requiring additional support systems like pneumatic or hydraulic sources. This results in higher energy efficiency and lower operational costs. At […]

Wie wählt man einen Aktor aus?

Determining Specific Valve Drive Parameters For precise fluid control applications, it is essential to define the final valve drive parameters based on factors such as fluid pressure, media type, and control method. This ensures that the selected electric actuator meets the operational requirements. The following parameters should be determined before finalizing the actuator model: Choose […]

Technische Anfrage

[email protected] Phone (+86) 130 2633 1611 WhatsApp Ken Bryan In site chat Click on the icon at the bottom right corner to chat with us…