Cara Menginstal dan Menggunakan

5 langkah untuk mulai menggunakan aktuator DCL Pasang aktuator ke katup Periksa pembatas mekanis Pengkabelan Atur posisi akhir Buka/Tutup Mulai Menggunakan Cara Penggunaan Lihat Selengkapnya > Catatan Aplikasi Lihat Selengkapnya > Panduan Pengguna Lihat Selengkapnya > Sebelumnya: FAQ Berikutnya: 5 Langkah untuk Mulai Menggunakan Aktuator DCL

Dokumen Teknis Aktuator DCL

Standar (ISO/GB/EU) Lihat Selengkapnya > Artikel Teknis Lihat Selengkapnya >

Perawatan & Perbaikan Aktuator DCL

Kesalahan Umum & Pemecahan Masalah untuk Aktuator ON-OFF untuk Aktuator Modulasi untuk Aktuator DC24V untuk Aktuator ON-OFF DCL-02 untuk Aktuator Modulasi DCL-02 Lihat Selengkapnya >

Bagaimana Cara Mengatur Histeresis Aktuator?

Setting the hysteresis allows the actuator to better match PID closed-loop control applications. Steps to Set the Hysteresis: Turn the S-A switch (highlighted in the red box below) to position 2. Rotate the adjustment knob (highlighted in the yellow box) to set the hysteresis. Each scale mark represents 0.5%. The adjustable hysteresis range is 0.5% […]

Jenis katup apa saja yang dapat digerakkan oleh aktuator listrik DCL?

The DCL electric actuator is mainly used to drive butterfly valves with a diameter of less than 600mm, ball valves with a diameter of less than 350mm, and ventilation dampers and air flap valves with a diameter of less than 1200mm. Beyond these applications, some interesting use cases are also worth noting. For example: Rotating […]

Bagaimana cara kerja aktuator listrik?

Once connected to a power supply (AC380V, AC220V, AC24V, or DC24V), DCL electric actuators can be controlled by a Distributed Control System (DCS) using various control signals, including analog signals, digital signals, bus communication, and IoT networks. The actuator drives the electric valve to fully open, fully close, or adjust to a specified position, enabling […]

Mengapa memilih aktuator listrik?

An electric actuator utilizes a motor-driven reduction mechanism to achieve both rotary and linear motion of a valve. Since it is powered by a motor, the electric actuator features a simple and reliable structure without requiring additional support systems like pneumatic or hydraulic sources. This results in higher energy efficiency and lower operational costs. At […]

Artikel Teknis

5 Steps to Start Using DCL Actuator

1. Install actuator onto the valve Turn the valve in fully closed position. Install the bracket on the valve. Connect the coupling on the valve shaft. Drive the actuator to the fully closed position with manual handle. Insert the actuator output shaft into the square hole of the coupling. Tighten the connecting between these parts. […]

How-tos of DCL Actuator

Previous：5 Steps to Start Using DCL Actuator Next：User Manual of DCL Actuator