{"id":6032,"date":"2023-08-03T20:13:29","date_gmt":"2023-08-03T12:13:29","guid":{"rendered":"https:\/\/www.dcl-controls.com\/?p=6032"},"modified":"2025-03-27T08:36:44","modified_gmt":"2025-03-27T08:36:44","slug":"on-off-actuator","status":"publish","type":"post","link":"https:\/\/dclactuator.com\/et_ee\/tugi\/hr-ajam\/on-off-actuator","title":{"rendered":"ON-OFF ajamite levinud rikked ja t\u00f5rkeotsing"},"content":{"rendered":"
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

This guide applies to the switch-type actuators of the DCL explosion-proof series, standard series, and quick-open series. The models are as follows:<\/p>

Weather-proof Actuator:<\/strong> DCL-05, DCL-10, DCL-20, DCL-40, DCL-60, DCL-100, DCL-160, DCL-250
Explosion-Proof Actuator:<\/strong> DCL-Ex05, DCL-Ex10, DCL-Ex20, DCL-Ex40, DCL-Ex60
Quick-Turn Actuator:<\/strong> DCL-K05, DCL-K10, DCL-K20, DCL-K40, DCL-K100<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t

Levinumad rikked ja t\u00f5rkeotsingu meetodid<\/h1>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

\u00a0<\/p>
Rike<\/strong><\/th>V\u00f5imalikud p\u00f5hjused<\/strong><\/th>Troubleshooting Methods<\/strong><\/th><\/tr><\/thead>
T\u00e4iturmehhanism ei avane ega sulgu k\u00e4ivitamisel<\/strong><\/td>

1. Incorrect wiring.<\/p>

2. Incorrect power supply.<\/p>

3. Faulty control switch or relay.<\/p>

4. Control system mismatch.<\/p>

5. Multiple actuators or actuator in parallel with other devices.<\/p><\/td>

1. Check the wiring against the actuator\u2019s wiring diagram to ensure it is correct.<\/p>

2. Verify power supply output voltage is \u00b110% of rated voltage, and the current is at least three times the actuator\u2019s rated current.<\/p>

3. Use a multimeter to measure input voltage at the actuator’s control terminal and confirm it matches expected values.<\/p>

4. Use a mechanical switch to test actuator operation. If it works, verify the control system output logic.<\/p>

5. Switch-type actuators should not be connected in parallel with other devices; use a single control circuit.<\/p><\/td><\/tr>

Actuator only opens or closes, not both<\/strong><\/td>

1. Incorrect wiring.<\/p>

2. Incorrect full open\/full close cam settings.<\/p><\/td>

1. Use a mechanical switch to test actuator functionality. If it works, verify the control system output logic.<\/p>

2. Check actuator\u2019s wiring against the wiring diagram.<\/p>

3. Adjust the cam settings according to the “How to Set Switch-type Electric Valves” manual.<\/p><\/td><\/tr>

Actuator stops in the middle of its stroke<\/strong><\/td>

1. Valve is stuck.<\/p>

2. Solid particles in the fluid medium causing valve blockage.<\/p>

3. Incorrect full open\/full close block settings.<\/p><\/td>

1. Check if the valve is stuck. Remove obstructions and retry after the actuator cools down from overload protection.<\/p>

2. Inspect the fluid medium for solid particles. Remove any blockage and retry after cooling.<\/p>

3. Adjust block settings according to the “How to Set Switch-type Electric Valves” manual.<\/p><\/td><\/tr>

T\u00e4iturmehhanismi ei saa k\u00e4sirattaga p\u00f6\u00f6rata<\/strong><\/td>

1. Solid particles in the fluid medium causing valve blockage.<\/p>

2. Valve is stuck.<\/p>

3. Actuator\u2019s reduction mechanism is damaged.<\/p><\/td>

1. Check fluid medium for particles causing blockage. Remove obstructions and retry after cooling.<\/p>

2. Inspect valve for any stuck parts. Remove blockage and retry.<\/p>

3. If actuator cannot be turned by hand, remove it from the valve. If it still doesn’t turn, replace with a new actuator.<\/p><\/td><\/tr>

Positsioni tagasiside signaali v\u00e4ljund puudub<\/strong><\/td>

1. Incorrect switch wiring.<\/p>

2. Incorrect full open\/full close cam settings.<\/p>

3. Overcurrent causing damage to the position feedback signal switch.<\/p><\/td>

1. Check wiring of the switch against the actuator\u2019s wiring diagram to ensure it is correct.<\/p>

2. Verify full open\/full close cam is properly compressing the position feedback switch.<\/p>

3. Measure the position feedback circuit to check if the switch is intact and properly connected.<\/p><\/td><\/tr><\/tbody><\/table>

\u00a0<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t

Please check if the operating conditions meet the parameter requirements.<\/h1>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Electric actuators may fail due to improper use or operating in incorrect conditions. To ensure long-term, trouble-free operation, the actuator must be used within the operating conditions specified in the product datasheet.<\/p>

  • Power Supply Voltage:<\/strong> The supply voltage must be within the actuator’s rated operating voltage range. Overvoltage or undervoltage may reduce the actuator’s lifespan.<\/p><\/li>

  • Power Supply Current:<\/strong> Since the motor’s starting current is significantly higher than the rated current, please ensure that the power supply can provide a current capacity at least 3 times the actuator’s rated current to ensure reliable operation.<\/p><\/li>

  • Temperature:<\/strong> Ensure that the actuator operates within the rated temperature range. Operating the actuator outside the specified temperature range may cause malfunction, reduced lifespan, or eventual failure.<\/p><\/li>

  • Environment:<\/strong> The DCL switch-type actuators are rated at IP67 for wind and rain protection. They are generally suitable for both indoor and outdoor use, providing protection against rain, splashes, and UV exposure (sunlight), which typically extends the product’s lifespan. Extremely corrosive environments may cause premature failure of electronic components. Do not use non-explosion-proof actuators in explosive atmospheres.<\/p><\/li>

  • Duty Cycle:<\/strong> The duty cycle of the DCL switch-type actuator is 70% (42 seconds of operation per minute, with a required 18 seconds off). Exceeding a 70% duty cycle will trigger thermal protection for the motor.<\/p><\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

    \n\t\t\t\t
    \n\t\t\t\t\t

    Check if the wiring of the actuator is correct.<\/h1>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    Ensure that all electrical connections are properly made according to the wiring diagram provided in the product manual. Incorrect wiring can lead to malfunction or damage to the actuator. Verify the following:<\/p>

    • The power supply connections are properly secured and there are no loose wires.<\/p><\/li>

    • The control signal wiring is correctly connected, ensuring polarity and signal type are properly matched.<\/p><\/li>

    • The ground connection (if applicable) is properly established to avoid electrical hazards.<\/p><\/li>

    • Double-check the connection of any external components, such as limit switches or feedback devices, to ensure they are wired correctly.<\/p><\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

      \n\t\t\t\t
      \n\t\t\t\t\t\t\t
      \n\t\t\t\t\t
      \n\t\t\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t\t
      \n\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t

      SEES - V\u00c4LJAS<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t\t
      \n\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t

      A - 2 aktiivse l\u00f5ppasendi signaaliv\u00e4ljundiga<\/p>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t
      • Juhtige ajamit avamiseks v\u00f5i sulgemiseks K-ga<\/li>
      • L\u00f5ppasendi AVATUD\/SULETUD v\u00e4ljundklemm saadab s\u00fcndmuse 220 V AC aktiivse signaalina, kui l\u00f5ppasend on saavutatud.<\/li><\/ul>

        \u00a0<\/p>

        \u00dchenduse \u00fcksikasjad:<\/strong><\/p>

        1. AC85-220V toitepinge neutraaljuhtme \u00fchendamine P1-ga.<\/li>
        2. L\u00fclitage AC85-220V liin ventiili sulgemiseks asendisse CLOSE (P2).<\/li>
        3. Ventiili avamiseks l\u00fclitage AC85-220V liin asendisse AVATUD (P3).<\/li>
        4. P5 on AVATUD l\u00f5ppasendi klemm, mis v\u00e4ljastab AC220V allikat, mida saab kasutada indikaatortule k\u00e4ivitamiseks, kui ajam on j\u00f5udnud avatud l\u00f5ppasendisse.<\/li>
        5. P6 on l\u00f5ppasendi AVATUD klemm, mis v\u00e4ljastab AC220V allikat, mida saab kasutada indikaatortule juhtimiseks, kui ajam on saavutanud suletud l\u00f5ppasendi.<\/li>
        6. \u00dchendage maandus P7-ga.<\/li><\/ol>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
          \n\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t

          B - Kahe passiivse l\u00f5ppasendi l\u00fclitiga<\/p>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t
          • Juhtige ajamit avamiseks v\u00f5i sulgemiseks K-ga<\/li>
          • L\u00f5ppasendi AVATUD\/SULETUD v\u00e4ljundklemm saadab s\u00fcndmuse passiivse signaali kujul, kui l\u00f5ppasend on saavutatud.<\/li><\/ul>

            \u00a0<\/p>

            \u00dchenduse \u00fcksikasjad:<\/strong><\/p>

            1. AC85-220V toitepinge neutraaljuhtme \u00fchendamine P1-ga.<\/li>
            2. L\u00fclitage AC85-220V liin ventiili sulgemiseks asendisse CLOSE (P2).<\/li>
            3. Ventiili avamiseks l\u00fclitage AC85-220V liin asendisse AVATUD (P3).<\/li>
            4. P4 on l\u00f5ppasendi AVATUD\/SULETUD passiivse kontaktsignaali COM, mis on tavaliselt \u00fchendatud signaaliga GND.<\/li>
            5. P5 on AVATUD l\u00f5ppasendi klemm, mis \u00fchendatakse COM-iga, kui ajam on saavutanud avatud l\u00f5ppasendi.<\/li>
            6. P6 on l\u00f5ppasendi CLOSE klemm, mis \u00fchendatakse COM-iga, kui ajam saavutab suletud l\u00f5ppasendi.<\/li>
            7. \u00dchendage maandus P7-ga.<\/li><\/ol>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
              \n\t\t\t\t\t\t
              \n\t\t\t\t\t
              \n\t\t\t
              \n\t\t\t\t\t\t
              \n\t\t\t\t
              \n\t\t\t\t\t

              G - kahe l\u00f5ppasendi l\u00fclitiga alalisvoolumootor<\/p>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

              \n\t\t\t\t
              \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
              \n\t\t\t\t
              \n\t\t\t\t\t\t\t\t\t
              • Juhtige ajamit avama v\u00f5i sulgema toitepinge suuna abil klemmide 1 ja 2 vahel<\/li>
              • L\u00f5ppasendi AVATUD\/SULETUD v\u00e4ljundklemm saadab s\u00fcndmuse passiivse signaali kujul, kui l\u00f5ppasend on saavutatud.<\/li><\/ul>

                \u00a0<\/p>

                \u00dchenduse \u00fcksikasjad:<\/strong><\/p>

                1. Ventiili sulgemiseks \u00fchendage DC24V+ P1-ga ja DC24V- P2-ga.<\/li>
                2. Ventiili sulgemiseks \u00fchendage DC24V+ P2-ga ja DC24V- P1-ga.<\/li>
                3. P3 on l\u00f5ppasendi AVATUD\/SULETUD passiivse kontaktsignaali COM, mis on tavaliselt \u00fchendatud signaaliga GND.<\/li>
                4. P4 on AVATUD l\u00f5ppasendi klemm, mis \u00fchendatakse COM-iga, kui ajam on saavutanud avatud l\u00f5ppasendi.<\/li>
                5. P5 on l\u00f5ppasendi CLOSE klemm, mis \u00fchendatakse COM-iga, kui ajam saavutab suletud l\u00f5ppasendi.<\/li>
                6. \u00dchendage maandus P7-ga.<\/li><\/ol>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
                  \n\t\t\t
                  \n\t\t\t\t\t\t
                  \n\t\t\t\t
                  \n\t\t\t\t\t

                  H - 3-faasiline 380 V vahelduvvoolumootor kahe l\u00f5ppasendi l\u00fclitiga<\/p>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

                  \n\t\t\t\t
                  \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                  \n\t\t\t\t
                  \n\t\t\t\t\t\t\t\t\t
                  • V\u00e4lise inverteri abil saab ajamit avada v\u00f5i sulgeda, et muuta toitepinge faasi.<\/li>
                  • L\u00f5ppasendi AVATUD\/SULETUD v\u00e4ljundklemm saadab s\u00fcndmuse passiivse signaali kujul, kui l\u00f5ppasend on saavutatud.<\/li><\/ul>

                    \u00a0<\/p>

                    \u00dchenduse \u00fcksikasjad:<\/strong><\/p>

                    1. \u00dchendades 3-faasilise AC380V inverteri v\u00e4ljundi P1, P2 ja P3-ga, saab ajamit juhtida ventiili avamiseks v\u00f5i sulgemiseks, muutes 3 faasi j\u00e4rjekorda.<\/li>
                    2. AC380V neutraaljuhtme \u00fchendamine N(P4)-ga.<\/li>
                    3. P5-d kasutatakse koost\u00f6\u00f6ks v\u00e4lise l\u00fclitiga inverteri 3 faasi j\u00e4rjekorra juhtimiseks. See klemm \u00fchendatakse N(P4)-ga, kui ajam ei ole SULETUD l\u00f5ppasendis, ja lahutatakse N(P4)-st p\u00e4rast seda, kui ajam on saavutanud SULETUD l\u00f5ppasendi.<\/li>
                    4. P6-d kasutatakse v\u00e4lise l\u00fclitiga koost\u00f6\u00f6ks inverteri 3 faasi j\u00e4rjekorra juhtimiseks. See klemm \u00fchendatakse N(P4)-ga, kui ajam ei ole AVATUD l\u00f5ppasendis, ja lahutatakse N(P4)-st p\u00e4rast seda, kui ajam on saavutanud AVATUD l\u00f5ppasendi.<\/li>
                    5. P7 on l\u00f5ppasendi AVATUD\/SULETUD passiivse kontaktsignaali COM, mis on tavaliselt \u00fchendatud signaaliga GND.<\/li>
                    6. P8 on AVATUD l\u00f5ppasendi klemm, mis \u00fchendatakse COM-iga, kui ajam on saavutanud avatud l\u00f5ppasendi.<\/li>
                    7. P9 on l\u00f5ppasendi CLOSE klemm, mis \u00fchendatakse COM-iga, kui ajam saavutab suletud l\u00f5ppasendi.<\/li>
                    8. \u00dchendage maandus P12-ga.<\/li><\/ol>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
                      \n\t\t\t\t\t\t
                      \n\t\t\t\t\t
                      \n\t\t\t
                      \n\t\t\t\t\t\t
                      \n\t\t\t\t
                      \n\t\t\t\t\t

                      S\u00fcgavliikumine ja positsioneerimine<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
                      \n\t\t\t\t\t\t
                      \n\t\t\t\t\t
                      \n\t\t\t
                      \n\t\t\t\t\t\t
                      \n\t\t\t\t
                      \n\t\t\t\t\t

                      F - Positsioneerimis\u00fcksusega<\/p>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

                      \n\t\t\t\t
                      \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                      \n\t\t\t\t
                      \n\t\t\t\t\t\t\t\t\t
                      • Juhtige ajamit avamiseks v\u00f5i sulgemiseks K-ga<\/li>
                      • Reaalajas klapi asend saadetakse v\u00e4lja 4-20 mA signaalina.<\/li><\/ul>

                        \u00a0<\/p>

                        \u00dchenduse \u00fcksikasjad:<\/strong><\/p>

                        1. \u00dchendage AC85-220V toitejuhe L-iga ja neutraal N-iga.<\/li>
                        2. Ventiili sulgemiseks l\u00fclitage AC85-220V liin asendisse CLOSE (P2).<\/li>
                        3. Ventiili avamiseks l\u00fclitage AC85-220V liin asendisse AVATUD (P3).<\/li>
                        4. V\u00e4ljundi -\/+ \u00fchendamine s\u00fcsteemiga, et saata v\u00e4lja reaalajas klapi asend.<\/li><\/ol>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
                          \n\t\t\t
                          \n\t\t\t\t\t\t
                          \n\t\t\t\t
                          \n\t\t\t\t\t

                          C - 1K\u03a9\/500\u03a9 potentsiomeetriga<\/p>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

                          \n\t\t\t\t
                          \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                          \n\t\t\t\t
                          \n\t\t\t\t\t\t\t\t\t
                          • Juhtige ajamit avamiseks v\u00f5i sulgemiseks K-ga<\/li>
                          • Reaalajas klapi asend saadetakse v\u00e4lja potentsiomeetri takistusv\u00e4\u00e4rtusena.<\/li><\/ul>

                            \u00a0<\/p>

                            \u00dchenduse \u00fcksikasjad:<\/strong><\/p>

                            1. AC85-220V toitepinge neutraaljuhtme \u00fchendamine P1-ga.<\/li>
                            2. L\u00fclitage AC85-220V liin ventiili sulgemiseks asendisse CLOSE (P2).<\/li>
                            3. Ventiili avamiseks l\u00fclitage AC85-220V liin asendisse AVATUD (P3).<\/li>
                            4. P4 on potentsiomeetri madal pool, mis on tavaliselt \u00fchendatud signaaliga GND.<\/li>
                            5. Juhts\u00fcsteemi signaali sisendi \u00fchendamine P5-ga. Takistuse v\u00e4\u00e4rtus P4 ja P5 vahel suureneb, kui ajam ventiili avab, samas kui takistuse v\u00e4\u00e4rtus P5 ja P6 vahel v\u00e4heneb.<\/li>
                            6. P6 on potentsiomeetri k\u00f5rgeim pool, mis on tavaliselt \u00fchendatud signaali toitega.<\/li>
                            7. \u00dchendage maandus P7-ga.<\/li><\/ol>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
                              \n\t\t\t
                              \n\t\t\t\t\t\t
                              \n\t\t\t\t
                              \n\t\t\t\t\t

                              D - Potentsiomeetri ja l\u00f5ppasendi tagasisidega<\/p>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

                              \n\t\t\t\t
                              \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                              \n\t\t\t\t
                              \n\t\t\t\t\t\t\t\t\t
                              • Juhtige ajamit avamiseks v\u00f5i sulgemiseks K-ga<\/li>
                              • Reaalajas klapi asend saadetakse v\u00e4lja potentsiomeetri takistusv\u00e4\u00e4rtusena.<\/li>
                              • L\u00f5ppasendi AVATUD\/SULETUD v\u00e4ljundklemm saadab s\u00fcndmuse passiivse signaali kujul, kui l\u00f5ppasend on saavutatud.<\/li><\/ul>

                                \u00a0<\/p>

                                \u00dchenduse \u00fcksikasjad:<\/strong><\/p>

                                1. AC85-220V toitepinge neutraaljuhtme \u00fchendamine P1-ga.<\/li>
                                2. L\u00fclitage AC85-220V liin ventiili sulgemiseks asendisse CLOSE (P2).<\/li>
                                3. Ventiili avamiseks l\u00fclitage AC85-220V liin asendisse AVATUD (P3).<\/li>
                                4. P4 on l\u00f5ppasendi AVATUD\/SULETUD passiivse kontaktsignaali COM, mis on tavaliselt \u00fchendatud signaaliga GND.<\/li>
                                5. P5 on AVATUD l\u00f5ppasendi klemm, mis \u00fchendatakse COM-iga, kui ajam on saavutanud avatud l\u00f5ppasendi.<\/li>
                                6. P6 on l\u00f5ppasendi CLOSE klemm, mis \u00fchendatakse COM-iga, kui ajam saavutab suletud l\u00f5ppasendi.<\/li>
                                7. P7 on potentsiomeetri madal pool, mis on tavaliselt \u00fchendatud signaaliga GND.<\/li>
                                8. Juhts\u00fcsteemi signaali sisendi \u00fchendamine P8-ga. Takistuse v\u00e4\u00e4rtus P7 ja P8 vahel suureneb, kui ajam ventiili avab, samas kui takistuse v\u00e4\u00e4rtus P8 ja P9 vahel v\u00e4heneb.<\/li>
                                9. P9 on potentsiomeetri k\u00f5rgeim pool, mis on tavaliselt \u00fchendatud signaali toitega.<\/li>
                                10. \u00dchendage maandus P12-ga.<\/li><\/ol>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
                                  \n\t\t\t\t\t\t
                                  \n\t\t\t\t\t
                                  \n\t\t\t
                                  \n\t\t\t\t\t\t
                                  \n\t\t\t\t
                                  \n\t\t\t\t\t\t\t\t\t

                                  M\u00e4rkus:<\/p>

                                  • Katkendliku kasti sees olev vooluring on ajami sisemine vooluring. V\u00e4ljas olev vooluring aga demonstreerib ajami elektri\u00fchendust.<\/li>
                                  • Kui teil on \u00fchendusahela kohta muid erin\u00f5udeid, v\u00f5tke julgelt \u00fchendust meie tehnilise toega.\u00a0<\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>","protected":false},"excerpt":{"rendered":"

                                    See juhend kehtib DCL plahvatuskindla seeria, standardseeria ja kiiravamise seeria l\u00fclitit\u00fc\u00fcpi ajamite kohta. Mudelid on j\u00e4rgmised: Ilmastikukindel ajam: DCL-05, DCL-10, DCL-20, DCL-40, DCL-60, DCL-100, DCL-160, DCL-250 Plahvatuskindel ajam: DCL-Ex05, DCL-Ex10, DCL-Ex20, DCL-Ex40, DCL-Ex60 Kiirp\u00f6\u00f6rdega ajam: DCL-K05, DCL-K10, DCL-K20, DCL-K40, DCL-K100 Levinumad rikked ja t\u00f5rkeotsingu meetodid Rikete v\u00f5imalikud p\u00f5hjused T\u00f5rgete t\u00f5rkeotsingu meetodid [\u2026]<\/p>","protected":false},"author":1,"featured_media":10962,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":true,"footnotes":""},"categories":[103],"tags":[53],"class_list":["post-6032","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-mr-actuator","tag-actuator"],"acf":[],"_links":{"self":[{"href":"https:\/\/dclactuator.com\/et_ee\/wp-json\/wp\/v2\/posts\/6032","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/dclactuator.com\/et_ee\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/dclactuator.com\/et_ee\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/dclactuator.com\/et_ee\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/dclactuator.com\/et_ee\/wp-json\/wp\/v2\/comments?post=6032"}],"version-history":[{"count":0,"href":"https:\/\/dclactuator.com\/et_ee\/wp-json\/wp\/v2\/posts\/6032\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/dclactuator.com\/et_ee\/wp-json\/wp\/v2\/media\/10962"}],"wp:attachment":[{"href":"https:\/\/dclactuator.com\/et_ee\/wp-json\/wp\/v2\/media?parent=6032"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/dclactuator.com\/et_ee\/wp-json\/wp\/v2\/categories?post=6032"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/dclactuator.com\/et_ee\/wp-json\/wp\/v2\/tags?post=6032"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}