{"id":6003,"date":"2023-08-01T19:11:40","date_gmt":"2023-08-01T11:11:40","guid":{"rendered":"https:\/\/www.dcl-controls.com\/?p=6003"},"modified":"2025-03-23T06:53:45","modified_gmt":"2025-03-23T06:53:45","slug":"modbus-um","status":"publish","type":"post","link":"https:\/\/dclactuator.com\/cs_cz\/podpora\/aktuator-2\/modbus-um","title":{"rendered":"Aplika\u010dn\u00ed pozn\u00e1mka k Modbusu pro ak\u010dn\u00ed \u010dleny DCL"},"content":{"rendered":"
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Pohony DCL podporuj\u00ed protokol Modbus-RTU. S odkazem na tuto aplika\u010dn\u00ed p\u0159\u00edru\u010dku m\u016f\u017eete p\u0159ipojit pohony DCL k sb\u011brnici Modbus.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\u603b\u7ebf\u578bDCL\u6267\u884c\u5668-Modbus\u3001CAN\u3001Profibus\u3001Ethernet\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Panel<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t
SF-LC\/MB<\/figcaption>\n\t\t\t\t\t\t\t\t\t\t<\/figure>\n\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t
SF-ZC\/MB<\/figcaption>\n\t\t\t\t\t\t\t\t\t\t<\/figure>\n\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

1. Definice rozhran\u00ed<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

P1\uff1a220 V AC N
P2\uff1a220 V AC L
P3\uff1aVstup 4\u201320 mA \u2013
P4\uff1aVstup 4\u201320 mA+
P5\uff1aV\u00fdstup 4\u201320 mA
P6\uff1aV\u00fdstup 4\u201320 mA+
P7\uff1aRS485 A
P8\uff1aRS485 B<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t

2. Tla\u010d\u00edtko<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Otev\u0159\u00edt<\/strong>: Pou\u017e\u00edv\u00e1 se v re\u017eimu nastaven\u00ed. Stisknut\u00edm tohoto tla\u010d\u00edtka otev\u0159ete pohon, uvoln\u011bn\u00edm jej zastav\u00edte. Sou\u010dasn\u00fdm stisknut\u00edm tla\u010d\u00edtek Set a Open nastav\u00edte pln\u011b otev\u0159enou polohu.<\/p>

Zav\u0159eno<\/strong>: Pou\u017e\u00edv\u00e1 se v re\u017eimu nastaven\u00ed. Stisknut\u00edm tohoto tla\u010d\u00edtka se pohon zav\u0159e, uvoln\u011bn\u00edm se zastav\u00ed. Sou\u010dasn\u00fdm stisknut\u00edm tla\u010d\u00edtek Nastaven\u00ed a Otev\u0159\u00edt nastav\u00edte polohu \u00fapln\u00e9ho zav\u0159en\u00ed.<\/p>

Soubor<\/strong>: Pou\u017e\u00edv\u00e1 se v re\u017eimu nastaven\u00ed. Toto tla\u010d\u00edtko se pou\u017e\u00edv\u00e1 v kombinaci s dal\u0161\u00edmi tla\u010d\u00edtky k nastaven\u00ed parametr\u016f.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t

3. P\u0159epnout<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Ji\u017en\u00ed Afrika<\/strong>Nastaven\u00ed provozn\u00edho re\u017eimu<\/p>

1 \u2013 Norm\u00e1ln\u00ed modulace<\/p>

2\u2013Re\u017eim nastaven\u00ed<\/p>

3\u2013Reverzn\u00ed modulace<\/p>

SB<\/strong>Nastaven\u00ed bezpe\u010dnostn\u00ed polohy (v\u00fdchoz\u00ed nastaven\u00ed 2)<\/p>

1\u2013Je\u010fte do \u00fapln\u00e9ho otev\u0159en\u00ed<\/p>

2. Udr\u017eujte pozici<\/p>

3\u2013Je\u010fte do \u00fapln\u00e9ho uzav\u0159en\u00ed<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t

4. Hysterze<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Nastavte hodnotu hystereze od 0,5% do 5%, kde jedna stupnice p\u0159edstavuje 0,5%.<\/p>

Pohon nezm\u011bn\u00ed polohu ventilu, dokud mezera mezi indikovanou polohou vstupn\u00edho sign\u00e1lu a aktu\u00e1ln\u00ed polohou ventilu neklesne nad hodnotu hystereze.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t

5. Indikace<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

L1<\/strong>Zelen\u00e1, indik\u00e1tor nap\u00e1jen\u00ed;<\/p>

L2<\/strong>\u010cerven\u00e1, chyba vstupn\u00edho sign\u00e1lu, sv\u00edt\u00ed, kdy\u017e je vstupn\u00ed sign\u00e1l mimo rozsah;<\/p>

L3<\/strong>\u010cerven\u00e1, chyba potenciometru, sv\u00edt\u00ed, kdy\u017e je potenciometr v abnorm\u00e1ln\u00edm stavu nebo je p\u0159eru\u0161en\u00fd p\u0159ipojovac\u00ed vodi\u010d.<\/p>

L4<\/strong>\u010cerven\u00e1, chyba zaseknut\u00ed, sv\u00edt\u00ed, kdy\u017e pohon nelze otev\u0159\u00edt nebo zav\u0159\u00edt.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t

Nastaven\u00ed<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

P\u0159epn\u011bte SA na 2 pro vstup do re\u017eimu nastaven\u00ed. Pot\u00e9 m\u016f\u017eete nastavit rozsah ot\u00e1\u010den\u00ed, nastavit bezpe\u010dnostn\u00ed polohu, kalibrovat vstupn\u00ed a v\u00fdstupn\u00ed sign\u00e1l atd.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t

1. Nastaven\u00ed provozn\u00edho rozsahu<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Nastaven\u00ed pln\u011b zav\u0159en\u00e9 polohy\uff1a<\/strong><\/p>

  1. Stiskn\u011bte tla\u010d\u00edtko KO\/KC pro \u00fapln\u00e9 uzav\u0159en\u00ed ventilu.<\/li>
  2. Dr\u017ete tla\u010d\u00edtko KS a pot\u00e9 tla\u010d\u00edtko KC, dokud se po cca 3-4 sekund\u00e1ch nezapne L2, co\u017e znamen\u00e1, \u017ee konfigurace pln\u011b zav\u0159en\u00e9 polohy je hotov\u00e1.<\/li>
  3. Nyn\u00ed m\u016f\u017eete tato 2 tla\u010d\u00edtka uvolnit.<\/li><\/ol>

    Nastaven\u00ed pln\u011b otev\u0159en\u00e9 polohy:<\/strong><\/p>

    1. Stiskn\u011bte tla\u010d\u00edtko KO\/KC pro \u00fapln\u00e9 otev\u0159en\u00ed ventilu.<\/li>
    2. Dr\u017ete tla\u010d\u00edtko KS a pot\u00e9 tla\u010d\u00edtko KO, dokud se po cca 3-4 sekund\u00e1ch nezapne L2, co\u017e znamen\u00e1, \u017ee konfigurace pln\u011b otev\u0159en\u00e9 polohy je hotov\u00e1.<\/li>
    3. Nyn\u00ed m\u016f\u017eete tato 2 tla\u010d\u00edtka uvolnit.<\/li>
    4. \u00a0<\/li><\/ol>

      Pozn\u00e1mka: Pokud byla pln\u011b otev\u0159en\u00e1 a zav\u0159en\u00e1 poloha nakonfigurov\u00e1na se stejnou polohou, konfigurace bude \u00fasp\u011b\u0161n\u011b provedena. Pohon se v\u0161ak nebude ot\u00e1\u010det v modula\u010dn\u00edm re\u017eimu.<\/em><\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

      \n\t\t\t\t
      \n\t\t\t\t\t

      2. Nastaven\u00ed parametr\u016f Modbusu<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t
      1. Registry od 0x0040 do 0x0042 se pou\u017e\u00edvaj\u00ed k nastaven\u00ed komunika\u010dn\u00edch parametr\u016f.<\/li>
      2. Nejprve vstupte do re\u017eimu nastaven\u00ed z\u00e1pisem hodnoty 0xA501 do registru 0x0040, pot\u00e9 nastavte ID pod\u0159\u00edzen\u00e9 jednotky a p\u0159enosovou rychlost z\u00e1pisem hodnot do registr\u016f 0x0041 a 0x0042.<\/li>
      3. Nov\u00e9 parametry budou aktualizov\u00e1ny v 1S.<\/li>
      4. Ukon\u010dete re\u017eim nastaven\u00ed z\u00e1pisem 0x0000 do registru 0x0040.<\/li><\/ol>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t

        Za\u010d\u00e1tek modulace<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t\t\t\t\t

        Oto\u010den\u00edm SA do polohy 1 spus\u0165te modulaci.<\/p>

        • Po zapnut\u00ed nap\u00e1jen\u00ed se pohon standardn\u011b nastav\u00ed tak, aby pro modulaci sledoval vstupn\u00ed sign\u00e1l 4\u201320 mA.<\/li>
        • Odes\u00edl\u00e1n\u00ed p\u0159\u00edkaz\u016f p\u0159es Modbus umo\u017e\u0148uje pohonu pracovat v re\u017eimu komunika\u010dn\u00edho \u0159\u00edzen\u00ed a po vypnut\u00ed a op\u011btovn\u00e9m zapnut\u00ed se automaticky vr\u00e1tit do re\u017eimu analogov\u00e9ho \u0159\u00edzen\u00ed.<\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t

          Modulace s 4-20mA<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t
          • Pohon p\u0159esune ventil do specifick\u00e9 polohy, jak to p\u0159edstavuje vstupn\u00ed sign\u00e1l 4\u201320 mA.<\/li>
          • V\u00fdstupn\u00ed sign\u00e1l 4\u201320 mA bude v re\u00e1ln\u00e9m \u010dase zobrazovat polohu ventilu.<\/li>
          • \u201eV\u00fdstup ON\/OFF otev\u0159en\u00fd\u201c vy\u0161le efektivn\u00ed sign\u00e1l (p\u0159ipojeno k COM), kdy\u017e je ventil pln\u011b otev\u0159en\u00fd.<\/li>
          • \u201eV\u00fdstup ON\/OFF pro uzav\u0159en\u00ed\u201c vyd\u00e1 efektivn\u00ed sign\u00e1l (p\u0159ipojen\u00ed k COM), kdy\u017e je ventil nastaven na pln\u011b uzav\u0159enou polohu.<\/li>
          • Pohon p\u0159esune ventil do bezpe\u010dnostn\u00ed polohy, pokud dojde k v\u00fdpadku nap\u00e1jen\u00ed nebo k poru\u0161e vstupn\u00edho sign\u00e1lu.<\/li>
          • Pohon se po obnoven\u00ed nap\u00e1jen\u00ed a vstupn\u00edho sign\u00e1lu vr\u00e1t\u00ed do modula\u010dn\u00edho re\u017eimu.<\/li><\/ul>

            \u00a0<\/p>

            Pozn\u00e1mka: Oto\u010den\u00edm p\u0159ep\u00edna\u010de SW2 do polohy 3 aktivujete reverzn\u00ed provoz. V takov\u00e9m p\u0159\u00edpad\u011b bude vstupn\u00ed hodnota 4 mA p\u0159evedena jako 20 mA a 20 mA jako 4 mA. Modulace je tedy stejn\u011b reverzn\u00ed.<\/em><\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

            \n\t\t\t\t
            \n\t\t\t\t\t

            Modulace pomoc\u00ed Modbus-RTU\/RS485<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t
            \n\t\t\t\t\t

            Hardwarov\u00e1 vrstva<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t
            • Podpora pohonu DCL. Protokol Modbus-RTU, RS485 se pou\u017e\u00edv\u00e1 ve fyzick\u00e9 vrstv\u011b.<\/li>
            • ID pod\u0159\u00edzen\u00e9ho za\u0159\u00edzen\u00ed: V\u00fdchoz\u00ed nastaven\u00ed 1<\/li>
            • P\u0159enosov\u00e1 rychlost: Konfigurovateln\u00e1 s v\u00fdchoz\u00ed hodnotou 9600<\/li>
            • Form\u00e1t dat RS485: 1 start bit + 8 datov\u00fdch bit\u016f + 1 stop bit (bez kontroly parity)<\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
              \n\t\t\t\t
              \n\t\t\t\t\t

              1. Rozhran\u00ed<\/h4>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
              \n\t\t\t\t\t\t
              \n\t\t\t\t\t
              \n\t\t\t
              \n\t\t\t\t\t\t
              \n\t\t\t\t
              \n\t\t\t\t\t\t\t\t\t\t\t\t
              \n\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t
              SF-LC\/MB<\/figcaption>\n\t\t\t\t\t\t\t\t\t\t<\/figure>\n\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
              \n\t\t\t
              \n\t\t\t\t\t\t
              \n\t\t\t\t
              \n\t\t\t\t\t\t\t\t\t\t\t\t
              \n\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t
              SF-ZC\/MB<\/figcaption>\n\t\t\t\t\t\t\t\t\t\t<\/figure>\n\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
              \n\t\t\t\t
              \n\t\t\t\t\t\t\t\t\t

              P1\uff1aNap\u00e1jen\u00ed \u2013
              P2\uff1aNap\u00e1jen\u00ed+
              P7\uff1aRS485 A
              P8\uff1aRS485 B
              P3~P6: Rezervov\u00e1no (4~20mA\/0~10V)<\/em><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

              \n\t\t\t\t
              \n\t\t\t\t\t

              2. Sch\u00e9ma zapojen\u00ed<\/h4>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
              \n\t\t\t\t
              \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
              \n\t\t\t\t
              \n\t\t\t\t\t

              Aplika\u010dn\u00ed vrstva<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
              \n\t\t\t\t
              \n\t\t\t\t\t

              1, ADU<\/h4>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
              \n\t\t\t\t
              \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Modbus\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
              \n\t\t\t\t
              \n\t\t\t\t\t

              2. Funk\u010dn\u00ed k\u00f3dy<\/h4>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
              \n\t\t\t\t
              \n\t\t\t\t\t\t\t
              \n\n\n\n\t\n\n\t\n\t\n\t
              Pr\u016fkaz toto\u017enosti<\/th>jm\u00e9no<\/th>popsat<\/th>\n<\/tr>\n<\/thead>\n
              0x03<\/td>\u010cten\u00ed v\u00edce registr\u016f<\/td>Ve vzd\u00e1len\u00e9m za\u0159\u00edzen\u00ed pou\u017eijte tento funk\u010dn\u00ed k\u00f3d k na\u010dten\u00ed obsahu po sob\u011b jdouc\u00edch blok\u016f v registru hold.<\/td>\n<\/tr>\n
              0x06<\/td>Zapi\u0161te jeden registr<\/td>Ve vzd\u00e1len\u00e9m za\u0159\u00edzen\u00ed pou\u017eijte tento funk\u010dn\u00ed k\u00f3d k z\u00e1pisu jednoho registru<\/td>\n<\/tr>\n
              0x10<\/td>Z\u00e1pis do v\u00edce registr\u016f<\/td>Ve vzd\u00e1len\u00e9m za\u0159\u00edzen\u00ed pou\u017eijte tento funk\u010dn\u00ed k\u00f3d k z\u00e1pisu po sob\u011b jdouc\u00edch blok\u016f registr\u016f (1 a\u017e p\u0159ibli\u017en\u011b 120 registr\u016f)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
              \n\t\t\t\t
              \n\t\t\t\t\t

              3. Nastaven\u00ed komunika\u010dn\u00edch parametr\u016f<\/h4>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
              \n\t\t\t\t
              \n\t\t\t\t\t\t\t\t\t
              1. Registry od 0x0040 do 0x0042 se pou\u017e\u00edvaj\u00ed k nastaven\u00ed komunika\u010dn\u00edch parametr\u016f.<\/li>
              2. Nejprve vstupte do re\u017eimu nastaven\u00ed z\u00e1pisem hodnoty 0xA501 do registru 0x0040, pot\u00e9 nastavte ID pod\u0159\u00edzen\u00e9 jednotky a p\u0159enosovou rychlost z\u00e1pisem hodnot do registr\u016f 0x0041 a 0x0042.<\/li>
              3. Nov\u00e9 parametry budou aktualizov\u00e1ny v 1S.<\/li>
              4. Ukon\u010dete re\u017eim nastaven\u00ed z\u00e1pisem 0x0000 do registru 0x0040.<\/li><\/ol>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                \n\t\t\t\t
                \n\t\t\t\t\t

                4. Obnoven\u00ed komunika\u010dn\u00edch parametr\u016f na v\u00fdchoz\u00ed hodnotu<\/h4>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                \n\t\t\t\t
                \n\t\t\t\t\t\t\t\t\t
                1. Nastavte SA a SB na 2.<\/li>
                2. Dr\u017ete tla\u010d\u00edtko KS d\u00e9le ne\u017e 3 sekundy, \u010derven\u00e1 LED dioda bude blikat, nyn\u00ed tla\u010d\u00edtko KS uvoln\u011bte.<\/li>
                3. Pot\u00e9 podr\u017ete tla\u010d\u00edtko KC d\u00e9le ne\u017e 3 sekundy, \u010derven\u00e1 LED dioda znovu blik\u00e1, uvoln\u011bte tla\u010d\u00edtko KC.<\/li>
                4. Komunika\u010dn\u00ed parametry se nyn\u00ed resetuj\u00ed na v\u00fdchoz\u00ed hodnoty (ID pod\u0159\u00edzen\u00e9 jednotky na 1, p\u0159enosov\u00e1 rychlost na 9600).
                  Toto se pou\u017e\u00edv\u00e1, kdy\u017e se vynechaj\u00ed komunika\u010dn\u00ed parametry.<\/li><\/ol>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                  \n\t\t\t\t
                  \n\t\t\t\t\t

                  5. Seznam registr\u016f<\/h4>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                  \n\t\t\t\t
                  \n\t\t\t\t\t\t\t
                  \n\n\n\n\t\n\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t
                  Registra\u010dn\u00ed adresa<\/th>Registra\u010dn\u00ed bit<\/th>Skupina sign\u00e1l\u016f<\/th>N\u00e1zev sign\u00e1lu<\/th>minim\u00e1ln\u00ed hodnota<\/th>Maxim\u00e1ln\u00ed hodnota<\/th>Spole\u010dnost<\/th>\u010cten\u00ed\/Z\u00e1pis<\/th>typ<\/th>Pravdivostn\u00ed tabulka<\/th>popsat<\/th>\n<\/tr>\n<\/thead>\n
                  0x0010<\/td>b15\u2013b5<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>\u010d\/p<\/td>\u0161esti\u00faheln\u00edk<\/td>Ponechat 0<\/td>ponechat<\/td>\n<\/tr>\n
                  b5<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>\u010d\/p<\/td>\u0161esti\u00faheln\u00edk<\/td>Ponechat 0<\/td>ponechat<\/td>\n<\/tr>\n
                  b4<\/td>\u0159\u00edzen\u00ed<\/td>zast\u00e1vka<\/td>\\<\/td>\\<\/td>\\<\/td>\u010d\/p<\/td>\u0161esti\u00faheln\u00edk<\/td>1: Stop, 0: Norm\u00e1ln\u00ed<\/td>P\u0159esta\u0148 b\u011bhat<\/td>\n<\/tr>\n
                  b3<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>r<\/td>\u0161esti\u00faheln\u00edk<\/td>Ponechat 0<\/td>ponechat<\/td>\n<\/tr>\n
                  b2<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>r<\/td>\u0161esti\u00faheln\u00edk<\/td>Ponechat 0<\/td>ponechat<\/td>\n<\/tr>\n
                  b1\u2013b0<\/td>\u0159\u00edzen\u00ed<\/td>re\u017eim<\/td>\\<\/td>\\<\/td>\\<\/td>\u010d\/p<\/td>\u0161esti\u00faheln\u00edk<\/td>1: \u0158\u00edzen\u00ed komunikace<\/td>Model \u0159\u00edzen\u00ed <\/td>\n<\/tr>\n
                  0x0011<\/td>b15-b0<\/td>\u0159\u00edzen\u00ed<\/td>NastavitOpenDegree<\/td>0<\/td>10000<\/td>%<\/td>\u010d\/p<\/td>cel\u00e9\/hex<\/td>0\u201310000 odpov\u00edd\u00e1 rozepnut\u00ed 0\u2013100%.<\/td>\u0158\u00edzen\u00ed otev\u00edr\u00e1n\u00ed ventilu (pom\u011brov\u00fd koeficient 1\/100)<\/td>\n<\/tr>\n
                  0x0012<\/td>b15-b0<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>r<\/td>\u0161esti\u00faheln\u00edk<\/td>Ponechat 0<\/td>ponechat<\/td>\n<\/tr>\n
                  0x0013<\/td>b15-b0<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>r<\/td>\u0161esti\u00faheln\u00edk<\/td>Ponechat 0<\/td>ponechat<\/td>\n<\/tr>\n
                  0x0014<\/td>b15-b0<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>r<\/td>\u0161esti\u00faheln\u00edk<\/td>Ponechat 0<\/td>ponechat<\/td>\n<\/tr>\n
                  0x0015<\/td>b15-b0<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>r<\/td>\u0161esti\u00faheln\u00edk<\/td>Ponechat 0<\/td>ponechat<\/td>\n<\/tr>\n
                  0x0016<\/td>b15-b0<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>r<\/td>\u0161esti\u00faheln\u00edk<\/td>Ponechat 0<\/td>ponechat<\/td>\n<\/tr>\n
                  0x0017<\/td>b15-b0<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>r<\/td>\u0161esti\u00faheln\u00edk<\/td>Ponechat 0<\/td>ponechat<\/td>\n<\/tr>\n
                  0x0018<\/td>b15\u2013b6<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>r<\/td>\u0161esti\u00faheln\u00edk<\/td>Ponechat 0<\/td>ponechat<\/td>\n<\/tr>\n
                  b5<\/td>informace<\/td>chybn\u00e1Pozice<\/td>\\<\/td>\\<\/td>\\<\/td>r<\/td>\u0161esti\u00faheln\u00edk<\/td>1: Porucha sign\u00e1lu polohy<\/td>Znak poruchy polohov\u00e9ho sign\u00e1lu<\/td>\n<\/tr>\n
                  b4<\/td>informace<\/td>errSignal<\/td>\\<\/td>\\<\/td>\\<\/td>r<\/td>\u0161esti\u00faheln\u00edk<\/td>1: Porucha vstupn\u00edho sign\u00e1lu<\/td>P\u0159\u00edznak chyby vstupn\u00edho sign\u00e1lu<\/td>\n<\/tr>\n
                  b3<\/td>informace<\/td>P\u0159\u00edznak overTorqueFlag<\/td>\\<\/td>\\<\/td>\\<\/td>r<\/td>\u0161esti\u00faheln\u00edk<\/td>1: P\u0159et\u00ed\u017een\u00ed<\/td>P\u0159\u00edznak p\u0159et\u00ed\u017een\u00ed <\/td>\n<\/tr>\n
                  b2<\/td>informace<\/td>zaseknut\u00fdVlajka<\/td>\\<\/td>\\<\/td>\\<\/td>r<\/td>\u0161esti\u00faheln\u00edk<\/td>1: Zablokovan\u00e1 rotace<\/td>Zna\u010dka blok\u00e1dy<\/td>\n<\/tr>\n
                  b1<\/td>informace<\/td>openRunFlag<\/td>\\<\/td>\\<\/td>\\<\/td>r<\/td>\u0161esti\u00faheln\u00edk<\/td>1: Zav\u0159en\u00ed ventilu<\/td>Zna\u010dka otev\u0159en\u00ed ventilu<\/td>\n<\/tr>\n
                  b0<\/td>informace<\/td>closeRunFlag<\/td>\\<\/td>\\<\/td>\\<\/td>r<\/td>\u0161esti\u00faheln\u00edk<\/td>1: Otev\u0159en\u00ed ventilu<\/td>Zna\u010dka uzav\u0159en\u00ed ventilu<\/td>\n<\/tr>\n
                  0x0019<\/td>b15-b0<\/td>informace<\/td>openDegree<\/td>0<\/td>10000<\/td>%<\/td>r<\/td>cel\u00e9\/hex<\/td>0\u201310000 odpov\u00edd\u00e1 rozepnut\u00ed 0\u2013100%.<\/td>Aktu\u00e1ln\u00ed otev\u00edr\u00e1n\u00ed ventilu (pom\u011brov\u00fd koeficient 1\/100)<\/td>\n<\/tr>\n
                  0x001A<\/td>b15-b0<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>r<\/td>\u0161esti\u00faheln\u00edk<\/td>Ponechat 0<\/td>ponechat<\/td>\n<\/tr>\n
                  0x001B<\/td>b15-b0<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>r<\/td>\u0161esti\u00faheln\u00edk<\/td>Ponechat 0<\/td>ponechat<\/td>\n<\/tr>\n
                  0x001C<\/td>b15-b0<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>r<\/td>\u0161esti\u00faheln\u00edk<\/td>Ponechat 0<\/td>ponechat<\/td>\n<\/tr>\n
                  0x001D<\/td>b15-b0<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>r<\/td>\u0161esti\u00faheln\u00edk<\/td>Ponechat 0<\/td>ponechat<\/td>\n<\/tr>\n
                  0x001E<\/td>b15-b0<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>r<\/td>\u0161esti\u00faheln\u00edk<\/td>Ponechat 0<\/td>ponechat<\/td>\n<\/tr>\n
                  0x001F<\/td>b15-b0<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>r<\/td>\u0161esti\u00faheln\u00edk<\/td>Ponechat 0<\/td>ponechat<\/td>\n<\/tr>\n
                  0x0040<\/td>b15-b0<\/td>konfigurace<\/td>cfgMode<\/td>1<\/td>127<\/td>\\<\/td>rw<\/td>\u0161esti\u00faheln\u00edk<\/td>0x0000: Vstup do norm\u00e1ln\u00edho re\u017eimu<\/td>V\u00fdb\u011br re\u017eimu, konfigura\u010dn\u00ed parametry lze upravovat pouze v konfigura\u010dn\u00edm re\u017eimu<\/td>\n<\/tr>\n
                  0x0041<\/td>b15-b0<\/td>konfigurace<\/td>adresa_cmm<\/td>1<\/td>127<\/td>\\<\/td>rw<\/td>\u0161esti\u00faheln\u00edk<\/td>1~127<\/td>Nastaven\u00ed komunika\u010dn\u00ed adresy<\/td>\n<\/tr>\n
                  0x0042<\/td>b15-b0<\/td>konfigurace<\/td>cmm_baudrate<\/td>\\<\/td>\\<\/td>\\<\/td>rw<\/td>\u0161esti\u00faheln\u00edk<\/td>0: P\u0159enosov\u00e1 rychlost 4800<\/td>nastavit p\u0159enosovou rychlost<\/td>\n<\/tr>\n
                  0x0043<\/td>b15-b0<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>r<\/td>\u0161esti\u00faheln\u00edk<\/td>Ponechat 0<\/td>ponechat<\/td>\n<\/tr>\n
                  0x0044<\/td>b15-b0<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>r<\/td>\u0161esti\u00faheln\u00edk<\/td>Ponechat 0<\/td>ponechat<\/td>\n<\/tr>\n
                  0x0045<\/td>b15-b0<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>r<\/td>\u0161esti\u00faheln\u00edk<\/td>Ponechat 0<\/td>ponechat<\/td>\n<\/tr>\n
                  0x0046<\/td>b15-b0<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>r<\/td>\u0161esti\u00faheln\u00edk<\/td>Ponechat 0<\/td>ponechat<\/td>\n<\/tr>\n
                  0x0047<\/td>b15-b0<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>r<\/td>\u0161esti\u00faheln\u00edk<\/td>Ponechat 0<\/td>ponechat<\/td>\n<\/tr>\n
                  0x0048<\/td>b15-b0<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>\\<\/td>r<\/td>\u0161esti\u00faheln\u00edk<\/td>Ponechat 0<\/td>ponechat<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                  \n\t\t\t\t
                  \n\t\t\t\t\t

                  Demo komunika\u010dn\u00ed data<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                  \n\t\t\t\t
                  \n\t\t\t\t\t

                  1. Nastaven\u00ed pozice<\/h4>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                  \n\t\t\t\t
                  \n\t\t\t\t\t\t\t\t\t

                  Vstupte do re\u017eimu \u0159\u00edzen\u00ed Modbus:<\/strong><\/p>

                  Tx\u2192\u25c701 10 00 10 00 01 02 00 01 65 00<\/p>

                  Rx\u2190\u25c601 10 00 10 00 01 00 0C<\/p>

                  Nastaven\u00e1 pozice: 0%<\/strong><\/p>

                  Tx\u2192\u25c701 10 00 11 00 01 02 00 00 A5 11<\/p>

                  Rx\u2190\u25c601 10 00 11 00 01 51 CC<\/p>

                  Nastaven\u00e1 pozice: 50% (5000 -> 0x1388)<\/strong><\/p>

                  Tx\u2192\u25c701 10 00 11 00 01 02 13 88 A8 47<\/p>

                  Rx\u2190\u25c601 10 00 11 00 01 51 CC<\/p>

                  Nastaven\u00e1 pozice: 100% (10000 -> 0x2710)<\/strong><\/p>

                  Tx\u2192\u25c701 10 00 11 00 01 02 27 10 BF 2D<\/p>

                  Rx\u2190\u25c601 10 00 11 00 01 51 CC<\/p>

                  Zast\u00e1vka<\/strong><\/p>

                  Tx\u2192\u25c701 10 00 10 00 01 02 00 11 64 CC<\/p>

                  Rx\u2190\u25c601 10 00 10 00 01 00 0C<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

                  \n\t\t\t\t
                  \n\t\t\t\t\t

                  2. Z\u00edskejte pozici<\/h4>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                  \n\t\t\t\t
                  \n\t\t\t\t\t\t\t\t\t

                  Tx\u2192\u25c701 03 00 18 00 02 44 0C<\/p>

                  Rx\u2190\u25c601 03 04 00 30 00 00 FA 3C<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

                  \n\t\t\t\t
                  \n\t\t\t\t\t

                  3. Nastaven\u00ed ID pod\u0159\u00edzen\u00e9 jednotky Modbus<\/h4>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                  \n\t\t\t\t
                  \n\t\t\t\t\t\t\t\t\t

                  Vstupte do re\u017eimu nastaven\u00ed<\/strong><\/p>

                  Tx\u2192\u25c701 10 00 40 00 01 02 A5 01 12 00<\/p>

                  Rx\u2190\u25c601 10 00 40 00 01 00 1D<\/p>

                  Nastavte ID pod\u0159\u00edzen\u00e9 jednotky na 2<\/strong><\/p>

                  Tx\u2192\u25c701 10 00 41 00 01 02 00 02 28 80<\/p>

                  Rx\u2190\u25c601 10 00 41 00 01 51 DD<\/p>

                  Ukon\u010dit re\u017eim nastaven\u00ed<\/strong><\/p>

                  Tx\u2192\u25c702 10 00 40 00 01 02 A5 00 C7 30<\/p>

                  Rx\u2190\u25c602 10 00 40 00 01 00 2E<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

                  \n\t\t\t\t
                  \n\t\t\t\t\t

                  4. Nastaven\u00ed p\u0159enosov\u00e9 rychlosti Modbus<\/h4>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                  \n\t\t\t\t
                  \n\t\t\t\t\t\t\t\t\t

                  Vstupte do re\u017eimu nastaven\u00ed<\/strong><\/p>

                  Tx\u2192\u25c701 10 00 40 00 01 02 A5 01 12 00<\/p>

                  Rx\u2190\u25c601 10 00 40 00 01 00 1D<\/p>

                  Nastavte p\u0159enosovou rychlost na 9600<\/strong><\/p>

                  Tx\u2192\u25c701 10 00 42 00 01 02 00 01 68 B2<\/p>

                  Rx\u2190\u25c601 10 00 42 00 01 A1 DD<\/p>

                  Ukon\u010dit re\u017eim nastaven\u00ed<\/strong><\/p>

                  Tx\u2192\u25c701 10 00 40 00 01 02 A5 00 D3 C0<\/p>

                  Rx\u2190\u25c601 10 00 40 00 01 00 1D<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<\/div>","protected":false},"excerpt":{"rendered":"

                  Pohony DCL podporuj\u00ed protokol Modbus-RTU. S odkazem na tuto aplika\u010dn\u00ed p\u0159\u00edru\u010dku m\u016f\u017eete p\u0159ipojit pohony DCL k sb\u011brnici Modbus. Panel SF-LC\/MB SF-ZC\/MB 1. Definice rozhran\u00ed P1\uff1a220VAC NP2\uff1a220VAC LP3\uff1a4-20mA Vstup \u2013P4\uff1a4-20mA Vstup+P5\uff1a4-20mA V\u00fdstup-P6\uff1a4-20mA V\u00fdstup+P7\uff1aRS485 AP8\uff1aRS485 B 2. Tla\u010d\u00edtko Otev\u0159en\u00ed: Pou\u017e\u00edv\u00e1 se v re\u017eimu nastaven\u00ed. Stisknut\u00edm tohoto tla\u010d\u00edtka otev\u0159ete pohon, uvoln\u011bn\u00edm jej zastav\u00edte. Stiskn\u011bte Nastavit [\u2026]<\/p>","protected":false},"author":1,"featured_media":10949,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"elementor_theme","format":"standard","meta":{"_acf_changed":true,"footnotes":""},"categories":[91],"tags":[53],"class_list":["post-6003","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-an-actuator","tag-actuator"],"acf":[],"_links":{"self":[{"href":"https:\/\/dclactuator.com\/cs_cz\/wp-json\/wp\/v2\/posts\/6003","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/dclactuator.com\/cs_cz\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/dclactuator.com\/cs_cz\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/dclactuator.com\/cs_cz\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/dclactuator.com\/cs_cz\/wp-json\/wp\/v2\/comments?post=6003"}],"version-history":[{"count":0,"href":"https:\/\/dclactuator.com\/cs_cz\/wp-json\/wp\/v2\/posts\/6003\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/dclactuator.com\/cs_cz\/wp-json\/wp\/v2\/media\/10949"}],"wp:attachment":[{"href":"https:\/\/dclactuator.com\/cs_cz\/wp-json\/wp\/v2\/media?parent=6003"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/dclactuator.com\/cs_cz\/wp-json\/wp\/v2\/categories?post=6003"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/dclactuator.com\/cs_cz\/wp-json\/wp\/v2\/tags?post=6003"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}