{"id":5308,"date":"2023-05-25T14:38:18","date_gmt":"2023-05-25T06:38:18","guid":{"rendered":"http:\/\/www.dcl-controls.com\/?p=5308"},"modified":"2025-03-23T06:24:19","modified_gmt":"2025-03-23T06:24:19","slug":"set-up-dcl-actuator","status":"publish","type":"post","link":"https:\/\/dclactuator.com\/cs_cz\/podpora\/jak-na-aktuator\/nastaveni-pohonu-dcl","title":{"rendered":"Jak nastavit modula\u010dn\u00ed elektrick\u00fd ventil?"},"content":{"rendered":"
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

1. Instalace pohonu na ventil<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Postupujte podle pokyn\u016f k instalaci v \u201eJak nainstalovat pohon na ventil\u201c<\/strong> spr\u00e1vn\u011b nainstalujte pohon na ventil. Norm\u00e1ln\u00ed provoz ov\u011b\u0159te ru\u010dn\u00edm testem pohybu ventilu.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t

2. Nastaven\u00ed mechanick\u00fdch limit\u016f pro pln\u011b uzav\u0159enou polohu<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

  • Pomoc\u00ed ru\u010dn\u00edho kola p\u0159esu\u0148te ventil do polohy pln\u011b uzav\u0159en\u00e1 poloha<\/strong>. Ujist\u011bte se, \u017ee se mechanick\u00fd doraz nedot\u00fdk\u00e1 stav\u011bc\u00edho \u0161roubu ani pouzdra.<\/p><\/li>

  • Uvoln\u011bte zaji\u0161\u0165ovac\u00ed \u0161roub stupnice<\/strong>, nastavte stupnici tak, aby se ukazatel zarovnal s 0 stup\u0148\u016f<\/strong> (poloha ZAV\u0158ENO) a pot\u00e9 ut\u00e1hn\u011bte pojistn\u00fd \u0161roub.<\/p><\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

    \n\t\t\t\t
    \n\t\t\t\t\t

    3. Nastaven\u00ed mechanick\u00fdch limit\u016f pro pln\u011b otev\u0159enou polohu<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    • Pomoc\u00ed ru\u010dn\u00edho kola p\u0159esu\u0148te ventil do polohy pln\u011b otev\u0159en\u00e1 poloha<\/strong>. Ujist\u011bte se, \u017ee se mechanick\u00fd doraz nedot\u00fdk\u00e1 stav\u011bc\u00edho \u0161roubu ani pouzdra.<\/p><\/li>

    • Pokud je zdvih ventilu 90\u00b0, m\u011bl by se ukazatel zarovnat s 0 stup\u0148\u016f<\/strong> (OTEV\u0158EN\u00c1 poloha) na stupnici.<\/p><\/li><\/ul>

      D\u016fle\u017eit\u00e9 pozn\u00e1mky:<\/strong><\/p>

      • Pokud nen\u00ed b\u011bhem lad\u011bn\u00ed z v\u00fdroby uvedeno jinak, je \u00fahel zdvihu pohonu mezi pln\u011b zav\u0159enou a pln\u011b otev\u0159enou polohou obvykle 90\u00b0<\/strong>.<\/p><\/li>

      • Pokud se po p\u00e1rov\u00e1n\u00ed ventil\u016f polohy pln\u011b zav\u0159en\u00e9ho a pln\u011b otev\u0159en\u00e9ho pohonu neshoduj\u00ed s polohami ventilu, je t\u0159eba prov\u00e9st \u00fapravy. Ujist\u011bte se, \u017ee mechanick\u00e9 limity jsou nastaveny podle n\u00ed\u017ee uveden\u00e9ho diagramu.<\/p><\/li>

      • V\u0161echny modula\u010dn\u00ed pohony (typ E) ji\u017e b\u011bhem p\u0159izp\u016fsobov\u00e1n\u00ed ventil\u016f zohled\u0148uj\u00ed posuny potenci\u00e1lu v pracovn\u00ed oblasti potenciometru. Proto obvykle nen\u00ed nutn\u00e9 upravovat potenciometr a p\u0159evody.<\/p><\/li>

      • Svorky zapojen\u00ed by m\u011bly b\u00fdt spr\u00e1vn\u011b zapojeny dle sch\u00e9matu, aby nedo\u0161lo k po\u0161kozen\u00ed servopohonu. Nep\u0159ipojujte "moc"<\/strong> termin\u00e1lu k \u201evstupn\u00ed sign\u00e1l\u201c<\/strong> nebo \u201ev\u00fdstupn\u00ed sign\u00e1l\u201c<\/strong> termin\u00e1ly.<\/p><\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

        \n\t\t\t\t
        \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\u534e\u6613\u79d1\u6280\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t

        4. Vysv\u011btlen\u00ed panelu servopohonu<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
        \n\t\t
        \n\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\u534e\u6613\u79d1\u6280\u7535\u52a8\u6267\u884c\u5668\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
        \n\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\u534e\u6613\u79d1\u6280\u7535\u52a8\u9600\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t\t\t\t\t

        Kl\u00ed\u010dov\u00e9 funkce:<\/strong><\/p>

        • OTEV\u0158ENO:<\/strong> V \u201eNastavit stav\u201c<\/strong>, stiskn\u011bte toto tla\u010d\u00edtko pro otev\u0159en\u00ed ventilu. Uvoln\u011bte pro zastaven\u00ed.<\/p><\/li>

        • Zav\u0159eno:<\/strong> V \u201eNastavit stav\u201c<\/strong>, stiskn\u011bte toto tla\u010d\u00edtko pro zav\u0159en\u00ed ventilu. Uvoln\u011bte pro zastaven\u00ed.<\/p><\/li>

        • Soubor:<\/strong> V \u201eNastavit stav\u201c<\/strong>, pou\u017eijte s Otev\u0159\u00edt<\/strong> nebo Zav\u0159eno<\/strong> k dosa\u017een\u00ed specifick\u00fdch funkc\u00ed.<\/p><\/li><\/ul>

          P\u0159ep\u00edna\u010de v\u00fdb\u011bru:<\/strong><\/p>

          • SA (V\u00fdb\u011br sign\u00e1lu):<\/strong> P\u0159ep\u00edna\u010dem vyberte typ vstupn\u00edho sign\u00e1lu (p\u0159\u00edm\u00fd nebo reverzn\u00ed) a nastavte stav. Aby se funkce projevila, ujist\u011bte se, \u017ee je za\u0159\u00edzen\u00ed zapnut\u00e9.<\/p>

            • 1<\/strong> \u2013 P\u0159\u00edm\u00e1 akce<\/p><\/li>

            • 2<\/strong> \u2013 Nastavit stav<\/p><\/li>

            • 3<\/strong> \u2013 Zp\u011btn\u00e1 akce<\/p><\/li><\/ul><\/li>

            • SB (O\u0161et\u0159en\u00ed selh\u00e1n\u00ed sign\u00e1lu):<\/strong> Vyberte, jak se m\u00e1 \u0159e\u0161it v\u00fdpadek sign\u00e1lu.<\/p>

              • 1<\/strong> \u2013 Ventil zcela otev\u0159en\u00fd<\/p><\/li>

              • 2<\/strong> \u2013 Ventil si udr\u017euje polohu<\/p><\/li>

              • 3<\/strong> \u2013 Ventil zcela uzav\u0159en<\/p><\/li><\/ul><\/li><\/ul>

                Potenciometr pro nastaven\u00ed mrtv\u00e9ho p\u00e1sma:<\/strong><\/p>

                • Upravte hodnotu mrtv\u00e9ho p\u00e1sma od 0,5% a\u017e 5,0%<\/strong> (v\u00fdchoz\u00ed tov\u00e1rn\u00ed nastaven\u00ed je 1.5%<\/strong>). Ka\u017ed\u00e9 nastaven\u00ed zvy\u0161uje p\u00e1smo necitlivosti o 0.5%<\/strong>.<\/p><\/li><\/ul>

                  Ukazatele:<\/strong><\/p>

                  • L1 (zelen\u00e1):<\/strong> Indik\u00e1tor zapnut\u00ed (sv\u00edt\u00ed, kdy\u017e je ovlada\u010d zapnut\u00fd).<\/p><\/li>

                  • L2 (\u010derven\u00e1):<\/strong> Indik\u00e1tor selh\u00e1n\u00ed vstupn\u00edho sign\u00e1lu (sv\u00edt\u00ed, kdy\u017e sel\u017ee vstupn\u00ed sign\u00e1l).<\/p><\/li>

                  • L3 (\u010derven\u00e1):<\/strong> Indik\u00e1tor poruchy obvodu detekce polohy (rozsv\u00edt\u00ed se, kdy\u017e je probl\u00e9m s kabel\u00e1\u017e\u00ed nebo sou\u010d\u00e1st\u00ed potenciometru polohy).<\/p><\/li>

                  • L4 (\u010derven\u00e1):<\/strong> Indik\u00e1tor mechanick\u00e9 poruchy zaseknut\u00ed (rozsv\u00edt\u00ed se, kdy\u017e dojde k zaseknut\u00ed mechanismu).<\/p><\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

                    \n\t\t\t\t
                    \n\t\t\t\t\t

                    5. Nastaven\u00ed<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                    \n\t\t\t\t
                    \n\t\t\t\t\t\t\t\t\t

                    Vstup do nastaven\u00e9ho stavu:<\/strong><\/p>

                    • Nastavte P\u0159ep\u00edna\u010d SA<\/strong> na pozici 2<\/strong>, vstupuj\u00edc\u00ed do Nastavit stav<\/strong>, kde lze konfigurovat funkce jako kalibrace zdvihu, zpracov\u00e1n\u00ed v\u00fdpadku sign\u00e1lu, nastaven\u00ed mrtv\u00e9ho p\u00e1sma, ru\u010dn\u00ed provoz a kalibrace v\u00fdstupn\u00edho proudu.<\/p><\/li><\/ul>

                      Kalibrace zdvihu:<\/strong><\/p>

                      • Pln\u011b uzav\u0159en\u00e1 kalibrace:<\/strong><\/p>

                        • Pou\u017eit\u00ed Otev\u0159\u00edt<\/strong> nebo Zav\u0159eno<\/strong> pro p\u0159esunut\u00ed ventilu do zcela uzav\u0159en\u00e9 polohy. Stiskn\u011bte a podr\u017ete Soubor<\/strong> a pot\u00e9 stiskn\u011bte tla\u010d\u00edtko Zav\u0159eno<\/strong>Dr\u017ete ob\u011b tla\u010d\u00edtka stisknut\u00e1 po dobu p\u0159ibli\u017en\u011b 4 sekundy<\/strong> a\u017e L2<\/strong> Rozsv\u00edt\u00ed se. Uvoln\u011bte ob\u011b tla\u010d\u00edtka, \u010d\u00edm\u017e dokon\u010d\u00edte \u00faplnou kalibraci zav\u0159en\u00e9ho stavu.<\/p><\/li><\/ul><\/li>

                        • Kalibrace s pln\u011b otev\u0159en\u00fdm oh\u0159evem:<\/strong><\/p>

                          • Pou\u017eit\u00ed Otev\u0159\u00edt<\/strong> nebo Zav\u0159eno<\/strong> pro p\u0159esun ventilu do pln\u011b otev\u0159en\u00e9 polohy. Stiskn\u011bte a podr\u017ete Soubor<\/strong> a pot\u00e9 stiskn\u011bte tla\u010d\u00edtko Otev\u0159\u00edt<\/strong>Dr\u017ete ob\u011b tla\u010d\u00edtka stisknut\u00e1 po dobu p\u0159ibli\u017en\u011b 4 sekundy<\/strong> a\u017e L2<\/strong> Rozsv\u00edt\u00ed se. Uvoln\u011bte ob\u011b tla\u010d\u00edtka, \u010d\u00edm\u017e dokon\u010d\u00edte kalibraci \u00fapln\u00e9ho otev\u0159en\u00ed.<\/p><\/li><\/ul><\/li><\/ul>

                            Zpracov\u00e1n\u00ed selh\u00e1n\u00ed vstupn\u00edho sign\u00e1lu:<\/strong><\/p>

                            • Pou\u017eijte P\u0159ep\u00edna\u010d SB<\/strong> vyberte, jak m\u00e1 syst\u00e9m \u0159e\u0161it v\u00fdpadek vstupn\u00edho sign\u00e1lu:<\/p>

                              • 1<\/strong> \u2013 Ventil zcela otev\u0159en\u00fd<\/p><\/li>

                              • 2<\/strong> \u2013 Ventil dr\u017e\u00ed svou polohu<\/p><\/li>

                              • 3<\/strong> \u2013 Ventil zcela uzav\u0159en<\/p><\/li><\/ul><\/li>

                              • Pozn\u00e1mka: Zm\u011bna P\u0159ep\u00edna\u010d SB<\/strong> je \u00fa\u010dinn\u00fd i b\u011bhem automatick\u00e9ho provozu (kdy\u017e Ji\u017en\u00ed Afrika<\/strong> je nastaveno na 1<\/strong> nebo 3<\/strong>).<\/p><\/li><\/ul>

                                Nastaven\u00ed hodnoty mrtv\u00e9ho p\u00e1sma:<\/strong><\/p>

                                • Oto\u010dte potenciometr mrtv\u00e9ho p\u00e1sma<\/strong> ve sm\u011bru hodinov\u00fdch ru\u010di\u010dek pro zv\u011bt\u0161en\u00ed p\u00e1sma necitlivosti a proti sm\u011bru hodinov\u00fdch ru\u010di\u010dek pro jeho sn\u00ed\u017een\u00ed. Ka\u017ed\u00fd p\u0159\u00edr\u016fstek zm\u011bn\u00ed p\u00e1smo necitlivosti o 0.5%<\/strong>V\u00fdchoz\u00ed tov\u00e1rn\u00ed nastaven\u00ed je 1.5%<\/strong>.<\/p><\/li><\/ul>

                                  Ventil m\u016f\u017eete ru\u010dn\u011b otev\u0159\u00edt nebo zav\u0159\u00edt pomoc\u00ed Otev\u0159\u00edt<\/strong> nebo Zav\u0159eno<\/strong> kl\u00ed\u010de v Nastavit stav<\/strong>.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

                                  \n\t\t\t\t
                                  \n\t\t\t\t\t

                                  6. Provoz<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                                  \n\t\t\t\t
                                  \n\t\t\t\t\t\t\t\t\t

                                  Vstup do automatick\u00e9ho provozu:<\/strong><\/p>

                                  • Nastavte P\u0159ep\u00edna\u010d SA<\/strong> na 1<\/strong> nebo 3<\/strong> vstoupit Automatick\u00fd provoz<\/strong>V tomto re\u017eimu poloha a v\u00fdstupn\u00ed sign\u00e1l aktu\u00e1toru sleduj\u00ed zm\u011bny vstupn\u00edho sign\u00e1lu.<\/p><\/li><\/ul>

                                    Pozn\u00e1mka:<\/strong><\/p>

                                    • V Zp\u011btn\u00e1 akce<\/strong>, a 4mA<\/strong> vstup odpov\u00edd\u00e1 100%<\/strong> otev\u0159en\u00ed ventilu, zat\u00edmco 20mA<\/strong> vstup odpov\u00edd\u00e1 0%<\/strong> otev\u00edrac\u00ed.<\/p><\/li>

                                    • Servo regul\u00e1tor m\u00e1 \u00farove\u0148 p\u0159esnosti T\u0159\u00edda 1<\/strong>, se z\u00e1kladn\u00ed chybou ne v\u011bt\u0161\u00ed ne\u017e \u00b11%<\/strong> a hystereze men\u0161\u00ed ne\u017e 1%<\/strong>.<\/p><\/li><\/ul>

                                      V\u00fdstupn\u00ed proud v z\u00e1vislosti na poloze ventilu:<\/strong><\/p>

                                      Vstupn\u00ed sign\u00e1l<\/th>4mA<\/th>8mA<\/th>12mA<\/th>16mA<\/th>20mA<\/th><\/tr><\/thead>
                                      Poloha ventilu<\/td>0%<\/td>25%<\/td>50%<\/td>75%<\/td>100%<\/td><\/tr>
                                      V\u00fdstupn\u00ed proud<\/td>4mA<\/td>8mA<\/td>12mA<\/td>16mA<\/td>20mA<\/td><\/tr><\/tbody><\/table><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                                      \n\t\t\t\t
                                      \n\t\t\t\t\t

                                      7. Kalibrace v\u00fdstupn\u00edho proudu<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                                      \n\t\t\t\t
                                      \n\t\t\t\t\t\t\t\t\t

                                      Tov\u00e1rn\u00ed kalibrace:<\/strong>
                                      Servoregul\u00e1tor je kalibrov\u00e1n z v\u00fdroby, tak\u017ee obvykle nen\u00ed nutn\u00e9 \u017e\u00e1dn\u00e9 u\u017eivatelsk\u00e9 nastaven\u00ed. Pokud se v\u0161ak v\u00fdstupn\u00ed proud v pln\u011b zav\u0159en\u00e9 (4 mA) nebo pln\u011b otev\u0159en\u00e9 (20 mA) poloze odchyluje o v\u00edce ne\u017e 1%<\/strong>, mo\u017en\u00e1 ho budete muset kalibrovat.<\/p>

                                      Kroky kalibrace:<\/strong><\/p>

                                      1. P\u0159ipojte 20mA stejnosm\u011brn\u00fd amp\u00e9rmetr<\/strong> k v\u00fdstupu.<\/p><\/li>

                                      2. Nastavte P\u0159ep\u00edna\u010d SA<\/strong> na 2<\/strong> vstoupit Nastavit stav<\/strong>.<\/p><\/li>

                                      3. Stiskn\u011bte a podr\u017ete Soubor<\/strong> a pot\u00e9 sou\u010dasn\u011b stiskn\u011bte tla\u010d\u00edtko Otev\u0159\u00edt<\/strong> a Zav\u0159eno<\/strong> tla\u010d\u00edtka.<\/p><\/li>

                                      4. Kdy\u017e L2<\/strong> rozsv\u00edt\u00ed se, uvoln\u011bte v\u0161echna tla\u010d\u00edtka a syst\u00e9m se p\u0159epne do Kalibrace 4mA<\/strong>Upravte proud na 4mA<\/strong> pomoc\u00ed Otev\u0159\u00edt<\/strong> a Zav\u0159eno<\/strong> kl\u00ed\u010de.<\/p><\/li>

                                      5. Po dokon\u010den\u00ed Kalibrace 4mA<\/strong>, stiskn\u011bte a podr\u017ete Soubor<\/strong> znovu a \u010dekejte L2<\/strong> rozsv\u00edt\u00ed se. Pot\u00e9 tla\u010d\u00edtko uvoln\u011bte pro vstup Kalibrace 20 mA<\/strong> a upravte proud na 20mA<\/strong>.<\/p><\/li><\/ol>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

                                        \n\t\t\t\t
                                        \n\t\t\t\t\t

                                        8. Diagnostika poruch a \u0159e\u0161en\u00ed probl\u00e9m\u016f<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                                        \n\t\t\t\t
                                        \n\t\t\t\t\t\t\t\t\t

                                        Kontrolky poruch:<\/strong><\/p>

                                        • L2 se rozsv\u00edt\u00ed:<\/strong>
                                          Chyba vstupn\u00edho sign\u00e1lu \u2013 zkontrolujte nap\u011bt\u00ed vstupn\u00edho sign\u00e1lu.<\/p>

                                          • Pokud je nap\u011bt\u00ed abnorm\u00e1ln\u00ed (mimo rozsah 0,88\u20134,4 V), zkontrolujte, zda nejsou obvody p\u0159eru\u0161en\u00e9, zkratovan\u00e9 nebo zda nejsou pou\u017eity nespr\u00e1vn\u00e9 zdroje sign\u00e1lu.<\/p><\/li><\/ul><\/li>

                                          • L3 se rozsv\u00edt\u00ed:<\/strong>
                                            Chyba detekce polohy \u2013 zkontrolujte potenciometr, zda nevykazuje probl\u00e9my, jako jsou p\u0159eru\u0161en\u00e9 obvody, zkraty nebo po\u0161kozen\u00ed.<\/p><\/li>

                                          • L4 se rozsv\u00edt\u00ed:<\/strong>
                                            Mechanick\u00e9 zaseknut\u00ed \u2013 zkontrolujte p\u0159ipojen\u00ed motoru a pohonu, zda nedo\u0161lo k zaseknut\u00ed.<\/p><\/li><\/ul>

                                            Neshoda ventilu a sign\u00e1lu:<\/strong>
                                            Pokud zdvih aktu\u00e1toru neodpov\u00edd\u00e1 vstupn\u00edmu sign\u00e1lu nebo pokud aktu\u00e1tor nem\u016f\u017ee dokon\u010dit cel\u00fd zdvih, m\u016f\u017ee to znamenat probl\u00e9m se servoregul\u00e1torem nebo obvodem potenciometru pro nastaven\u00ed p\u00e1sma necitlivosti.<\/p>

                                            Pro dal\u0161\u00ed pomoc postupujte podle krok\u016f pro \u0159e\u0161en\u00ed probl\u00e9m\u016f uveden\u00fdch pro ka\u017ed\u00fd chybov\u00fd k\u00f3d.<\/p><\/div><\/div><\/div><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>","protected":false},"excerpt":{"rendered":"

                                            1. Instalace pohonu na ventil Pro spr\u00e1vnou instalaci pohonu na ventil postupujte podle pokyn\u016f v \u010d\u00e1sti \u201eJak nainstalovat pohon na ventil\u201c. Norm\u00e1ln\u00ed provoz ov\u011b\u0159te ru\u010dn\u00edm testem pohybu ventilu. 2. Nastaven\u00ed mechanick\u00fdch limit\u016f pro pln\u011b uzav\u0159enou polohu Pomoc\u00ed ru\u010dn\u00edho kola p\u0159esu\u0148te ventil do [\u2026]<\/p>","protected":false},"author":1,"featured_media":10944,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"elementor_theme","format":"standard","meta":{"_acf_changed":true,"footnotes":""},"categories":[100],"tags":[53],"class_list":["post-5308","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-how-to-actuator","tag-actuator"],"acf":[],"_links":{"self":[{"href":"https:\/\/dclactuator.com\/cs_cz\/wp-json\/wp\/v2\/posts\/5308","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/dclactuator.com\/cs_cz\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/dclactuator.com\/cs_cz\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/dclactuator.com\/cs_cz\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/dclactuator.com\/cs_cz\/wp-json\/wp\/v2\/comments?post=5308"}],"version-history":[{"count":0,"href":"https:\/\/dclactuator.com\/cs_cz\/wp-json\/wp\/v2\/posts\/5308\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/dclactuator.com\/cs_cz\/wp-json\/wp\/v2\/media\/10944"}],"wp:attachment":[{"href":"https:\/\/dclactuator.com\/cs_cz\/wp-json\/wp\/v2\/media?parent=5308"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/dclactuator.com\/cs_cz\/wp-json\/wp\/v2\/categories?post=5308"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/dclactuator.com\/cs_cz\/wp-json\/wp\/v2\/tags?post=5308"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}